Hyundai Creta: Body Side Molding / Front Mud Guard: Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, then remove the front mud guard (A).

2.
To install, reverse the removal procedure.
  
Replace any damaged clips.
Rear Wheel Guard: Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Rear Mud Guard: Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Other information:

Hyundai Creta GS 2014-2024 Service Manual: Hood Seal Weatherstrip: Repair procedures
Replacement 1. Detach the clips, then remove the hood seal weatherstrip (A).    • Be careful not to scratch the hood seal wea ...

Hyundai Creta GS 2014-2024 Service Manual: Troubleshooting
Troubleshooting Symptom Possible cause Remedy Hard steering Improper front wheel alignment Excessive turning resistance of lower arm ball joint Low tire pressure No power assist Correct Replace ...

© 2017-2024 www.hcrmangs.com