Hyundai Creta: Fuel Delivery System / Fuel Pressure Regulator: Repair procedures

Hyundai Creta GS 2014-2024 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pressure Regulator: Repair procedures

Removal

1.	Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump")

2.	Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

3.	Remove the fixing clip (A), and then separate the head assembly (B).

4.	Remove the reservoir-cup (B) after releasing the fixing hooks (A).

5.	Remove the cap (A), and then fuel pressure regulator (B).

Installation

1.	Install in the reverse order of removal.

Fuel Sender: Repair procedures

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector ( ...

Fuel Line: Repair procedures

Removal 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") ...

Other information:

Hyundai Creta GS 2014-2024 Service Manual: Ambient Temperature Sensor
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The s ...

Hyundai Creta GS 2014-2024 Service Manual: Filler-Neck Assembly: Repair procedures
Removal 1. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A). 2. Lift the vehicle. 3. Remove the rear-LH wheel, tire, end the inner wheel house. 4. ...