Hyundai Creta: Automatic Transaxle System / Automatic Transaxle Control System
- Description and operation
- Components and components location
- Schematic diagrams
- Repair procedures
- Transaxle Control Module (TCM)
- Transaxle Oil Temperature Sensor
- Input Speed Sensor
- Output Speed Sensor
- Torque Converter Control Solenoid Valve (T/CON_VFS)
- 26 Brake Control Solenoid Valve (26/B_VFS)
- Line Pressure Control Solenoid Valve
- 35R Clutch Control Solenoid Valve (35R/C_VFS)
- Underdrive Brake Control Solenoid Valve (UD/B_VFS)
- Overdrive Clutch Control Solenoid Valve (OD/C_VFS)
- SS-A Solenoid Valve (ON/OFF)
- SS-B Solenoid Valve (ON/OFF)
- Inhibitor Switch
- Shift Lever
- Shift Cable
Oil Cooler
Components and components location
Components Location
1. ATF cooler
2. ATF cooler hose
3. Clamp
4. Automatic transaxle
Repair procedures
...
Description and operation
Description
•
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Rear Door Belt Inside Weatherstrip: Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt inside weatherstrip (A).
3.
To install, reverse the removal procedure.
...
Hyundai Creta GS 2014-2019 Service Manual: Manifold Absolute Pressure Sensor (MAPS)
Description and operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and
is installed on the surge tank. It senses absolute pressure of the surge tank
and transfers the analog signal proportional to the pressure to the ECM. By
using ...
