Hyundai Creta: Body (Interior and Exterior) / Body Side Molding
Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / Body Side Molding
- Roof Rack: Repair procedures
- Roof Side Molding: Repair procedures
- A Pillar Garnish: Repair procedures
- Fender Garnish: Repair procedures
- Quarter Garnish: Repair procedures
- Door Garnish: Repair procedures
- Front Wheel Guard: Repair procedures
- Rear Wheel Guard: Repair procedures
- Front Mud Guard: Repair procedures
- Rear Mud Guard: Repair procedures
- Side Sill Molding: Repair procedures
Rear Door Side Weatherstrip: Repair procedures
Replacement
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
21.6 ~ 32.3 N.m (2.2 ~ 3.2 kgf.m,16.9 ~ 23.9 ...
Roof Rack: Repair procedures
Replacement
•
Put on gloves to protect your hands.
...
Other information:
Hyundai Creta GS 2014-2019 Owners Manual: Engine compartment panel fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse box cover by
pressing the tab and pulling up the
cover.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in ...
Hyundai Creta GS 2014-2019 Service Manual: Start/Stop Button
Components and components location
Component
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center facia panel
(Refer to Body - "Crash Pad")
3. ...
© 2017-2026 www.hcrmangs.com
