Hyundai Creta: Evaporative Emission Control System / Canister: Repair procedures

Hyundai Creta GS 2014-2025 Service Manual / Emission Control System / Evaporative Emission Control System / Canister: Repair procedures

Removal

1.	Remove the fuel tank. (Refer to Fuel Delivery System - "Fuel Tank")

2.	Disconnect the vapor hose quick-connectors (A) and ventilation hose (B).

3.	Remove the protector mounting bolts (A).

4.	Remove the canister assembly.

5.	Remove the canister bracket after loosening the mounting bolts (A).

Inspection

Check for the following items visually.

–	Cracks or leakage of the canister

–	Loose connection, distortion, or damage of the vapor hose/tube

A: Canister ↔ Atmosphere

B: Canister ↔ Fuel Tank

C: Canister ↔ Intake Manifold

Installation

Install in the reverse order of removal.

Canister installation bolt :

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Schematic diagrams

Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold ...

Fuel Filler Cap: Description and operation

Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel f ...

Other information:

Hyundai Creta GS 2014-2025 Service Manual: Rear Transverse Trim
Components and components location Component Location 1. Rear transverse trim Repair procedures Replacement • Put on gloves to protec ...

Hyundai Creta GS 2014-2025 Service Manual: Regulator (Diesel 1.4, 1.6)
Components and components location Components 1. Clutch pedal assembly 2. Clutch pedal arm 3. Ignition lock & clutch switch 4. Washer 5. Snap pin 6. Master cylinder 7. Reservoir hose 8. Clutch tube 9. Regulator Repair ...