Hyundai Creta: Hood / Closing the hood
1. Before closing the hood, check the following:
- All filler caps in engine compartment must be correctly installed.
- Gloves, rags or any other combustible material must be removed from the engine compartment.
2. Return the support rod to its clip to prevent it from rattling.
3. Lower the hood halfway and let it drop. Make sure that it locks into place.
WARNING
- Before closing the hood, ensure that all obstructions are removed from the hood opening. Closing the hood with an obstruction present in the hood opening may result in property damage or severe personal injury.
- Do not leave gloves, rags or any other combustible material in the engine compartment. Doing so may cause a heat-induced fire. • Always double check to be sure that the hood is firmly latched before driving away. If it is not latched, the hood could open while the vehicle is being driven, causing a total loss of visibility, which might result in an accident.
- Do not move the vehicle with the hood raised. The view will be blocked and the hood could fall or be damaged.
Opening the hood
1. Make sure the shift lever is in P
(Park, for automatic transaxle) or
first gear or R (Reverse, for manual
transaxle) and set the parking brake.
2. Pull the release lever to unlatch
the h ...
Fuel filler door
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Components and components location
Component Location
1. Rear glass defogger
relay (Buil-in engine room relay box)
2. Rear glass defogger switch (Dual type)
3. Rear glass defogger
switch (Manual type)
4. Rear glass defogger
...
Hyundai Creta GS 2014-2019 Service Manual: Side Impact Sensor (SIS)
Description and operation
Description
The Side Impact Sensor (SIS) system consists of two front SIS which are installed
inside the Center Pillar (LH and RH).
They are remote sensors that detect acceleration due to collision at their mounting
locations. The primary purpose ...
