Components Location |
1. Cluster Ionizer |
Description |
Inspection |
1. |
Press the MODE switch more then 4 times within 2 seconds while pressing
the OFF switch.
* For diagnostic procedure, refer to DTC guide.
|
Diagnosis With GDS |
1. |
The heating, ventilation and air conditioning can be quickly diagnosed
failed parts with vehicle diagnostic system (GDS).
※ The diagnostic system (GDS) provides the following information.
(1) Self diagnosis : Checking the failure code (DTC) and display.
(2) Current data : Checking the system input/output data state.
(3) Actuation test : Checking the system operation condition.
(4) Additional function : Other controlling such as he system option
and zero point adjustment.
|
2. |
Select the 'Car model' and the system to be checked in order to check
the vehicle with the tester.
|
3. |
Select the 'Current data' menu to search the current state of the input/output
data.
The input/output data for the sensors corresponding to the Cluster Ionizer
can be checked.
|
Replacement |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box.
(Refer to Body - "Glove Box Housing")
|
3. |
Remove the passenger's side shower duct (A) after loosening the screw.
|
4. |
Disconnect the connector (A).
|
5. |
Loosen the mounting screw and then remove the cluster ionizer (B).
|
6. |
Install in the reverse order of removal.
|
Hyundai Creta GS 2014-2025 Service Manual: Specifications
Specification
Item
Specification
Power source
3V
Operating temperature
-20°C ~ +60°C (-4°F ~ +140°F)
RF Modulation
FSK
LF Modulation
ASK
...
Hyundai Creta GS 2014-2025 Owners Manual: Wipers and washers
A : Wiper speed control (front)
/ MIST – Single wipe
O / OFF – Off
--- / INT – Intermittent wipe
AUTO* – Auto control wipe
1 / LO– Low wiper speed
2 / HI – High wiper speed
B : Intermittent control wipe time
adjustment
C : Wash with brief wipes (front)
D : Rear wip ...