Two labels on your driver’s door sill show how much weight your vehicle was designed to carry: the Tire and Loading Information Label and the Certification Label.
Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle's weight ratings, from the vehicle's specifications and the Certification Label:
Base Curb Weight
This is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment.
Vehicle Curb Weight
This is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment.
Cargo Weight
This figure includes all weight added to the Base Curb Weight, including cargo and optional equipment.
GAW (Gross Axle Weight)
This is the total weight placed on each axle (front and rear) - including vehicle curb weight and all payload.
GAWR (Gross Axle Weight Rating)
This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Certification Label. The total load on each axle must never exceed its GAWR.
GVW (Gross Vehicle Weight)
This is the Base Curb Weight plus actual Cargo Weight plus passengers.
GVWR (Gross Vehicle Weight Rating)
This is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Certification Label located on the driver’s door sill.
Hyundai Creta GS 2014-2025 Owners Manual: Checking the engine oil level
1.Be sure the vehicle is on level
ground.
2.Start the engine and allow it to
reach normal operating temperature.
3.Turn the engine off and wait for a
few minutes (about 5 minutes) for
the oil to return to the oil pan.
4.Pull the dipstick out, wipe it clean,
and reinsert it fully.
WAR ...
Hyundai Creta GS 2014-2025 Owners Manual: Gauges
Speedometer
The speedometer indicates the speed
of the vehicle and is calibrated in kilometers
per hour (km/h).
Tachometer
The tachometer indicates the
approximate number of engine revolutions
per minute (rpm).
Use the tachometer to select the correct
shift points and to prevent lu ...