Hyundai Creta: Lighting System / Fog Lamps: Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
|
| 3. |
Remove the front fog lamp assembly (A) after loosening the mounting
screws (4EA).
|
| 4. |
Remove the front fog lamp bulb (A) by turning in the counter clock-wise
direction after disconnecting the connector.
|
| Installation |
| 1. |
Install the front fog lamp bulb.
|
| 2. |
Connect the front fog lamp connector.
|
| 3. |
Install the front bumper.
|
Rheostat: Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side cover.
3.
Remove the ...
License Lamps: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate trim.
(Refer to Body - "Tail Gate Trim")
...
Other information:
Hyundai Creta GS 2014-2024 Service Manual: ETC (Electronic Throttle control) System
Description and operation
Description
The Electronic Throttle Control (ETC) System consists of a throttle body with
an integrated control motor and throttle position sensor (TPS). Instead of the
traditional throttle cable, an Accelerator Position Sensor (APS) is used to
rec ...
Hyundai Creta GS 2014-2024 Service Manual: Auto Defogging Sensor
Description and operation
Description
The auto defogging sensor is installed on the front window glass. The sensor
judges and sends signal if moisture occurs to blow out wind for defogging. The
air conditioner control module receives signal from the sensor and restrains
moi ...
