Removal |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the tailgate trim.
(Refer to Body - "Tail Gate Trim")
|
3. |
Remove the license lamp assembly (A) after disengaing the retaining
clip and disconnect the connector (B).
|
Installation |
1. |
Install the license lamp assembly.
|
2. |
Install the tailgate trim.
|
3. |
Connect the negative (-) battery terminal.
|
Hyundai Creta GS 2014-2024 Service Manual: Troubleshooting
Standard Flow of Diagnostic Troubleshooting
Notes With Regard To Diagnosis
The phenomena listed in the following table are not abnormal.
Condition
Explanation
System check sound
When starting the engine, a thudding sound can so ...
Hyundai Creta GS 2014-2024 Service Manual: Accelerator Pedal: Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
terminal.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the mounting nuts (B).
...